Charter Telephone number

When you have a second telephone number, the telephone line from the telephone should be linked to line 2 on the back of the modems. Verify the telephone for a beep. When you do not have a dialling tone, please resume debugging. Unplug the currently active telephone. Plug in another telephone.

Verify the new telephone for a beep. When a dialling sound is detected, the error is due to your initial mobile or telephone. Resume debugging if there is no beep. Unplug the cord that connects the telephone line socket to the telephone line socket. Plug the telephone and your modems into another telephone outlet available in your home.

When a dialling sound is detected, please call us to fix the defective telephone sockets. Resume debugging if there is no beep. Disconnect the mains plug from the rear of the modems or directly from the socket. Please note: If the current lamp is still lit, you have a back-up of the battery and must either disconnect the batteries or use the resets button* to turn off the modems.

Allow 5 min and then reconnect the modems. Continue to allow 10 seconds for the modems to resettle. Watch a dialling tone. Do it. In case there is no ring back signal, please do not hesitate to get in touch with us. If you have a cordless modems, you can press the RESET key to restore your cordless setup, and you may need to get in touch with us to restore the cordless device.

When you are a television viewer, make sure your television is working. When you are an online user, make sure that you can establish a connection to the web. When only the telephone is switched off, resume debugging. When you have only one telephone number, the telephone line from the telephone should be plugged into line 1 on the back of the modem, and the coax should be plugged from the cord exit port or distributor to Line In on the back of the dial.

When you have a second telephone number, the telephone line from the telephone should be linked to line 2 on the back of the modems. Verify the telephone for a beep. When you do not have a dialling tone, please resume debugging. Unplug the currently active telephone. Plug in another telephone.

Verify the new telephone for a beep. When a dialling sound is detected, the error is due to your initial mobile or telephone. Resume debugging if there is no beep. Unplug the cord that connects the telephone line socket to the telephone line socket. Plug the telephone and your modems into another telephone outlet available in your home.

When a dialling sound is detected, please call us to fix the defective telephone sockets. Resume debugging if there is no beep. Disconnect the mains plug from the rear of the modems or directly from the socket. Please note: If the current lamp is still lit, you have a back-up of the battery and must either disconnect the batteries or use the resets button* to turn off the modems.

Allow 5 min and then reconnect the modems. Continue to allow 10 seconds for the modems to resettle. Watch a dialling tone. Do it. In case there is no ring back signal, please do not hesitate to get in touch with us. If you have a cordless modems, you can press the button to restore your cordless setup, and you may need to get in touch to restore the cordless device.

Choose Telephone from the drop-down list "What is your problem response number? When you have more than one modems, click the Troubleshooting tab for the appropriate one. Click the Reset My modem icon. When you are a television viewer, make sure your television is working. When you are an online user, make sure that you can establish a connection to the web.

When only the telephone is switched off, resume debugging. When you have only one telephone number, the telephone line from the telephone should be plugged into line 1 on the back of the modem, and the coax should be plugged from the cord exit port or distributor to Line In on the back of the dial.

When you have a second telephone number, the telephone line from the telephone should be linked to line 2 on the back of the modems. Verify the telephone for a beep. When you do not have a dialling tone, please resume debugging. Unplug the currently active telephone. Plug in another telephone.

Verify the new telephone for a beep. When a dialling sound is detected, the error is due to your initial mobile or telephone. Resume debugging if there is no beep. Unplug the cord that connects the telephone line socket to the telephone line socket. Plug the telephone and your modems into another telephone outlet available in your home.

When a dialling sound is detected, please call us to fix the defective telephone sockets. Resume debugging if there is no beep. Disconnect the mains plug from the rear of the modems or directly from the socket. Please note: If the current lamp is still lit, you have a back-up backup and must either disconnect the batteries or use the resets button* to turn off the modems.

Allow 5 min and then reconnect the modems. Continue to allow 10 seconds for the modems to resettle. Watch a dialling tone. Do it. In case there is no ring back signal, please do not hesitate to get in touch with us. If you have a cordless modems, you can press the wireless setup resets key to restore your cordless setup, and you may need to get in touch with us to restore the cordless device.